Checks the errors displayed by the onboard ECU of the FIAT vehicles. Supports errors caused by the engine, ABS, airbag, and automatic gearbox. Identifies the ECU, deletes the errors, reads and displays the diagnostics parameters, exports the errors, tests the actuators and more.
The 3.6.2 version of FiatECUScan is available as a free download on our website. The most popular versions of the FiatECUScan are 3.6, 3.5 and 3.4. The actual developer of the program is FiatECUScan.net. This PC program is developed for Windows XP/Vista/7/8/10 environment, 32-bit version.
Commonly, this program's installer has the following filenames: FiatECUScan2.exe, FiatECUScan.exe, FiatECUScan2 1.exe, Loader_for_FiatEcuScan_3.6.0.exe and _D3D828E227C481FF34D571.exe etc. This download was checked by our built-in antivirus and was rated as clean. The software lies within System Utilities, more precisely Device Assistants.
From the developer:
This diagnostics software allows you to perform various diagnostics of the supported modules.
Diagnostics is performed via k-line (VagCom) or ELM 327 interface connection to the vehicle's OBD connector (which is located near steering wheel) or to a manufacturer-specific connector (for older, pre-2000 cars).
You need to have a k-line (VagCom), ELM 327 v1.3 (or later) or OBDKey v1.40 interface cable in order to use this program.
Bluetooth interfaces are NOT RECOMMENDED!
- Any hardware that runs Windows XP, Windows Vista, Windows 7
- Microsoft .NET Framework Version 2.0 SP1. Free, available from www.microsoft.com.
- K-line connection cable connected to USB/PCMCIA/OnBoard serial port, ELM 327 v1.3 or OBDKey 1.40 interface
- 1.5GHz CPU and better required
You may want to check out more software, such as BitPim, TOSHIBA HW Setup or MAGIX ringtone maker, which might be similar to FiatECUScan.